Concrete floors built for the work on top of them.
DELAGA is a commercial and industrial concrete flooring contractor serving the GTA and Southern Ontario. We install epoxy and resin floors, polished concrete, urethane cement, integral coves and safety markings, and handle surface prep, repairs and concrete work for new construction, renovations and operating facilities.
One crew for the whole floor
From removing the old floor to the coves, lines and final topcoat, every step is handled by the same team.
Epoxy Flooring
Seamless, chemical-resistant epoxy systems for warehouses, plants, kitchens and institutional floors across the GTA.
Polished Concrete
Mechanically ground and polished concrete with densifier and guard for low-maintenance, high-traffic floors.
Urethane Cement Flooring
Heavy-duty urethane cement floors for food plants, kitchens and wet areas with heat, chemicals and washdowns.
Grind & Seal
Diamond grinding plus a penetrating or film-forming sealer, an economical way to dust-proof and protect concrete.
Quartz Broadcast Flooring
Coloured quartz broadcast into epoxy and sealed clear. A durable, slip-resistant floor for washrooms, kitchens, locker rooms and labs.
Polyurethane & Polyaspartic Coatings
Fast-curing, UV-stable polyaspartic and polyurethane coatings for quick turnarounds and tough topcoats.
ESD Flooring
Static-control resin flooring, tested to the specified resistance range, for electronics, labs and data rooms.
Anti-Slip Floor Coatings
Textured, slip-resistant floor coatings for wet areas, ramps, kitchens, stairs and loading zones.
Solid Colour Epoxy
Durable single-colour epoxy coatings for working floors in plants, warehouses and back-of-house areas.
Flake Epoxy Flooring
Textured epoxy with decorative vinyl flake for change rooms, corridors, kitchens and high-traffic areas.
Metallic Epoxy
Decorative metallic epoxy with depth and movement for showrooms, lobbies, retail and offices.
Integral Coving
Seamless floor-to-wall cove base in the same resin as the floor. Radius or 45 degree coves from 2" up to 9" high.
Safety Lines & Floor Markings
Aisle lines, walkways, forklift lanes, hazard striping and parking stalls, laid out to your plan in epoxy or urethane line paint.
Stair & Landing Coatings
Durable, slip-resistant coatings for stairwells and landings in condos, offices, schools and hospitals, installed around occupied buildings.
Parking Garage Coatings
Traffic membranes and deck coatings that protect parking structures from water, road salt and wear.
Balcony & Walkway Membranes
Waterproof, slip-resistant traffic membranes for condo balconies, exterior walkways, podium decks and rooftop decks.
Concrete Grinding & Surface Prep
Diamond grinding and shot blasting to the correct surface profile for coatings, overlays and polishing.
Shot Blasting & Scarifying
Dust-contained shot blasting and scarifying to profile concrete, remove coatings and take down trip edges before new flooring.
Flooring Removal
Removal of tile, VCT, carpet, coatings and adhesives down to clean concrete, ready for new flooring.
Self-Leveling & Floor Leveling
Self-leveling underlayments and toppings that flatten uneven slabs before new flooring or coatings.
Concrete & Crack Repair
Crack, spall and slab repairs that restore damaged concrete and prepare it for coatings or traffic.
Control & Expansion Joints
Semi-rigid polyurea joint filling and expansion joint repair that protects slab edges from wheel damage.
Slope-to-Drain
Re-sloping floors to drains with troweled mortar systems so water runs off instead of ponding.
Trench Drains & Floor Drains
New and replacement trench drains and floor drains, with saw cutting, setting to grade and the floor sloped to drain in one scope.
Slab Pours, Cutting & Concrete Work
New slab pours, saw-cutting, trenching and general concrete work for commercial and industrial projects.
Moisture Mitigation
Slab moisture testing and moisture vapour barrier primers that protect new coatings and flooring from blistering and delamination.
Concrete Waterproofing
Liquid-applied waterproofing membranes for mechanical rooms, balconies, decks and slabs over occupied space.
Floor Recoats & Maintenance
Topcoat recoats for worn epoxy and urethane floors, polished concrete re-burnishing and scheduled maintenance plans.
New builds, renovations and operating facilities
From a tenant fit-out on a tight GC schedule to a hospital floor replaced in phases, we work the way your project is run.
Floors for facilities that can't stop
New builds and operating sites alike. We plan around construction schedules, shifts, inspections and shutdown windows.
Healthcare & Laboratories
Mechanical, Boiler & Electrical Rooms
Warehouses & Logistics
Food & Beverage Processing
Manufacturing & Industrial Plants
Condos & Multi-Residential
Commercial Kitchens & Restaurants
Retail, Offices & Hospitality
Schools & Institutional Buildings
Auto Dealerships & Repair
Pharmaceutical, Electronics & Technology
Government, Transit & InfrastructureFrom estimate to finished floor
- Instant estimateAnswer a few questions online and see your estimate in about two minutes.
- Site assessmentWe visit, measure, check the slab and test moisture where it matters.
- Formal quoteYou get a written scope, schedule, price and warranty terms.
- InstallationCrews work to your schedule: GC timelines on new builds, or nights, weekends and phases in occupied sites.
- HandoverWe walk the floor with you and leave care instructions and your warranty.
Projects
Across the GTA and Southern Ontario
We also travel to London, Windsor, Sarnia, Chatham, Stratford, Kingston, Belleville, Peterborough, Cobourg, Orillia, Collingwood, Owen Sound, Welland, Grimsby, Tillsonburg, Simcoe and across Southern Ontario. Inquire to learn more.
Common questions
How much does a commercial epoxy or polished concrete floor cost?
It depends on the system, the size of the area and the condition of the slab. Use the instant estimate for a price range in about two minutes. Your formal quote follows a site assessment.
Can you work nights, weekends or in phases?
Yes. Our crews schedule around your operation, including nights, weekends and phased areas, so your facility keeps running.
Do you install coves with the floor?
Yes. We install radius and 45 degree integral coves from 2 to 9 inches high, in the same resin as the floor, so floor and wall base form one seamless, washable surface.
What areas do you serve?
The GTA and Southern Ontario, including Toronto, Peel, York, Durham, Halton, Hamilton, Waterloo Region, Niagara and beyond.
Is your work insured and warrantied?
Yes. Crews carry commercial liability insurance, are WSIB compliant and safety trained, and every project is warrantied with terms set out in your quote.
See what your floor will cost
Answer a few quick questions and see your estimate in about two minutes. A formal quote follows a site assessment.